COGIS - COA/BMP Information

CAERUS WASHCO LLC           K&H Ranches 1-661-5802XCH           Well API # 05-123-44268           Status: XX        Status Date: 06/19/2019           Location ID #:449355       SWSW 1 6N 61W WELD

COGIS - Conditions of Approval
COA Search Results - 6 record(s) returned.
Source
Document
Conditions of Approval
Form: (02 )
400891249
02/27/2017
1) Submit Form 42 electronically to COGCC 48 hours prior to MIRU (spud notice) for the first well activity with a rig on the pad and provide 48 hour spud notice via Form 42 for all subsequent wells drilled on the pad. 2) Provide cement coverage to a minimum of 200' above Niobrara and from 1500’ to 50’ above base of surface casing. Verify coverage with cement bond log. (Water wells within 2 miles developed in Upper Pierre zone visible on offset logs.)
Form: (02 )
400891249
02/27/2017
Bradenhead tests shall be performed and reported according to the following schedule and Form 17 submitted within 10 days of each test.: 1) All: Within 60 days of rig release, prior to stimulation. 2) Delayed completion: 6 months after rig release, prior to stimulation. 3) All: Within 30 days of first production, as reported on Form 5A.
Form: (02 )
400891249
02/27/2017
Provide offset well mitigation per the DJ Basin Horizontal Offset Policy for the following offset well(s) of concern: 05-123-05245, KIRCHHOF 4. 05-123-05246, WISEMAN-KURCHOFF 3. 05-123-05247, GREASEWOOD D SAND UNIT 3. 05-123-05249, KIRCHHOF ET AL*FRANCIS J 5. 05-123-05250, KIRCHHOF 7. 05-123-05253, KIRCHHOF 1. 05-123-08173, STATE 1. 05-123-10125, KIRCHOFF 34-25. 05-123-10486, GREASEWOOD STATE 1. 05-123-10937, KIRCHOF 14X-1. 05-123-11442, KIRCHOF ESTATE ET AL 1. 05-123-17517, ITR-KIRCHOF 22-1A. 05-123-22592, FRANK STATE 15-3. Ensure all applicable documentation is submitted based on the selected mitigation option chosen, and submit Form 42(s) (“OFFSET MITIGATION COMPLETED”) for the remediated well(s), referencing the API Number of the proposed horizontal well(s) stating what appropriate mitigation occurred and that it has been completed, prior to the hydraulic stimulation of this well.
Form: (02 )
401816653
06/19/2019
Operator acknowledges the proximity of the listed offset well(s). Operator agrees to comply with the DJ Basin Horizontal Offset Policy to mitigate the situation, ensure all applicable documentation is submitted based on the selected mitigation option chosen, submit Form 42(s) (“OFFSET MITIGATION COMPLETED”) for the mitigated well(s), stating that appropriate mitigation was completed prior to the hydraulic stimulation of this well. Offset wells to mitigate: 05-123-05245, KIRCHHOF 4. 05-123-05246, WISEMAN-KURCHOFF 3. 05-123-05247, GREASEWOOD D SAND UNIT 3. 05-123-05249, KIRCHHOF ET AL*FRANCIS J 5. 05-123-05250, KIRCHHOF 7. 05-123-05253, KIRCHHOF 1. 05-123-08173, STATE 1. 05-123-10125, KIRCHOFF 34-25. 05-123-10486, GREASEWOOD STATE 1. 05-123-10937, KIRCHOF 14X-1. 05-123-11442, KIRCHOF ESTATE ET AL 1. 05-123-17517, ITR-KIRCHOF 22-1A. 05-123-22592, FRANK STATE 15-3.
Form: (02 )
401816653
06/19/2019
1) Submit Form 42 online to COGCC 48 hours prior to MIRU (spud notice) for the first well activity with a rig on the pad and provide 48 hour spud notice via Form 42 for all subsequent wells drilled on the pad. 2) Provide cement coverage to a minimum of 200' above Niobrara. Verify coverage with cement bond log. Bradenhead Bradenhead tests shall be performed and reported according to the following schedule and Form 17 submitted within 10 days of each test.: 1) All: Within 60 days of rig release, prior to stimulation. If any pressure greater than 200 psi, must contact COGCC engineer prior to stimulation. 2) Delayed completion: 6 months after rig release, prior to stimulation. If any pressure greater than 200 psi, must contact COGCC engineer prior to stimulation. 3) A post-production test within 60 days after first sales, as reported on the Form 10, Certificate of Clearance.
Form: (02 )
401816653
06/19/2019
If location is not built by 2A expiration 2/27/20, Operator must Refile Form 2A for approval prior to location construction.


COGIS - Best Management Practices
BMPSearch Results - 4 record(s) returned.
Source
Document
BMP TypeBMP
Form: (02 )
400891249
02/27/2017
Planning
Rule 317.p - One of the first wells drilled on the pad will be logged with open-hole Resistivity Log and Gamma Ray Log from the kick-off point into the surface casing. All wells on the pad will have a cement bond log with gamma-ray run on production casing (or on intermediate casing if production liner is run) into the surface casing. The horizontal portion of every well will be logged with a measured-while-drilling gamma ray log. The Form 5, Completion Report, for each well on the pad will list all logs run and have those logs attached. The Form 5 for a well without open-hole logs shall clearly state “No open-hole logs were run” and shall clearly identify (by API#, well name & number) the well in which open-hole logs were run. Prior to drilling operations, Caerus Washco, LLC will perform an anti-collision scan of existing offset wells that have the potential of being within close proximity of the proposed well. This anti-collision scan will include definitive MWD or gyro surveys of the offset wells with included error of uncertainty per survey instrument, and compared against the proposed well path with its respective error of uncertainty. If current surveys do not exist for the offset wells, Operator may have gyro surveys conducted to verify ottom hole location. The proposed well will only be drilled if the anti-collision scan results indicate that there is not a risk for collision, or harm to people or the environment.
Form: (02 )
400891249
02/27/2017
Drilling/Completion Operations
Caerus Operating LLC will adhere to the COGCC Policy for Bradenhead Monitoring effective May 29, 2012.
Form: (02 )
401816653
06/19/2019
Planning
Alternative Logging Program: One of the first wells drilled on the pad will be logged with Open Hole Resistivity Log and Gamma Ray Log from the kick-off point to into the surface casing. All wells on the pad will have a cement bond log with gamma-ray run on production casing (or on intermediate casing if production liner is run) into the surface casing. The horizontal portion of every well will be logged with a measured-while-drilling gamma-ray log. The form 5, Completion Report, for each well on the pad will list all logs run and have those logs attached. The Form 5 for a well without open-hole logs shall clearly state "Alternative Logging Program - No open-hole logs were run" and shall clearly identify (by API#, well name & number) the well in which open-hole logs were run. Prior to drilling operations, Caerus Washco, LLC will perform an anti-collision scan of existing offset wells that have the potential of being within close proximity of the proposed well. This anti-collision scan will include definitive MWD or gyro surveys of the offset wells with included error of uncertainty per survey instrument and compared against the proposed well path with its respective error of uncertainty. If current surveys do not exist for the offset wells, Operator may have gyro surveys conducted to verify bottom hole location. The proposed well will only be drilled if the anti-collision scan results indicate that there is not a risk for collision, or harm to people or the environment.
Form: (02 )
401816653
06/19/2019
Drilling/Completion Operations
Caerus Operating LLC will adhere to the COGCC Policy for Bradenhead Monitoring effective May 29, 2012.