COGIS - Conditions of Approval Results

   KERR MCGEE OIL & GAS ONSHORE LP    PAPA JO 2-25 35N2-17HZ   LOCATION#: 452217   Status:AC as of 5/26/2021 4:32:37 PM   NWSW 8 1N 68W WELD COUNTY
Search Results - 3 record(s) returned.
Type Source Conditions of Approval
Best Management Practices
Financial Assurance
04
402018716
6/18/2019
Financial Assurance Surety Id 2019-0074 in the amount of $317,000 has been received, processed, and approved for Interim Reclamation.

Reclamation Specialist
04
402018716
6/17/2019
Approval of this form is an approval of the NTO request only. Areas detailed in the attached map are not a final delineation of the exact areas needed for production operations or interim reclamation, and are only an estimate. Future assessments regarding the size and extent of the areas needed for production may be determined on the ground by reclamation staff during a field inspection.

OGLA
02A
401130408
8/29/2017
The Approved Form 2A permit will be posted at the location during construction, drilling, and completions operations.

COGIS - Best Management Practices COGIS - Best Management Practices Results

Search Results - 23 record(s) returned.
BMP TypeSource BMP
Community Outreach and Notification
02A
401130408
5/30/2017
305.a.(2) A Notice of Intent to Conduct Operations was sent to each building unit owner within the Exception Zone or Buffer Zone Setback. Recipients did not contact KMG. As a part of planning this proposed location, Kerr-McGee held multi-disciplinary Surface Impact Planning Meetings regarding the impacts and mitigations associated with this proposed location. The toll-free hotline number and email for the Anadarko Colorado Response Line will be posted at the entrance to the lease access road for stakeholders during drilling and completion operations at this proposed location. Courtesy Notifications will be sent to impacted stakeholders prior to drilling operations and again prior to completions operations, providing contact information for the Anadarko Colorado Response Line and online resources.
Construction
02A
401130408
5/30/2017
604c.(2).M. Fencing Requirements: The completed wellsites will be surrounded with a fence and gate with adequate lock to restrict access to authorized personnel only. KMG personnel will monitor the wellsites regularly upon completion of the wells. Authorized representatives and/or KMG personnel shall be on-site during drilling and completion operations.
Construction
02A
401130408
5/30/2017
604c.(2).G. Berm Construction: A geosynthetic liner will be laid under the tanks on this location and a metal containment will be constructed. Berms or other secondary containment devices will be constructed around crude oil, condensate, and produced water storage tanks and shall enclose an area sufficient to contain and provide secondary containment for 150% of the largest single tank. Berms and other secondary containment devices shall be inspected at scheduled intervals and maintained in good condition
Drilling/Completion Operations
02A
401130408
5/30/2017
604c.(2).B. Closed Loop Drilling System: KMG will use a closed loop or “pitless” system for drilling and fluid management and will not construct a reserve pit.
Drilling/Completion Operations
02A
401130408
5/30/2017
604c.(2).C. Green Completions: Temporary above ground polyethylene water pipelines will deliver water to location operations from larger trunk lines to reduce truck traffic and minimize air pollution. Pipeline infrastructure is in place prior to completions operations to ensure saleable gas, once hydrocarbons are cut, is sent directly to sales without flaring during flowback.
Drilling/Completion Operations
02A
401130408
5/30/2017
803. Lighting: To the extent practicable, site lighting shall be shielded and directed downward and inward toward operations to avoid glare on public roads and nearby Building Units. LED lighting will be used during completion operations.
Dust control
02A
401130408
5/30/2017
805.c. Dust: Water will be placed on dirt access roads to mitigate dust as needed. If feasible, magnesium chloride will also be used as needed on access roads to further abate dust.
Final Reclamation
02A
401130408
5/30/2017
604c.(2).T. Well Site Cleared: The wellsite will be cleared of all non-essential equipment within ninety (90) days after all wells associated with the pad have been plugged and abandoned.
Final Reclamation
02A
401130408
5/30/2017
604c.(2).U. Identification of Plugged and Abandoned Wells: Pursuant to rule 319.a.(5)., once the well has been plugged and abandoned, KMG will identify the location of the wellbore with a permanent monument that will detail the well name and date of plugging.
General Housekeeping
02A
401130408
5/30/2017
604c.(2).O. Loadlines: All loadlines shall be bullplugged or capped.
General Housekeeping
02A
401130408
5/30/2017
604c.(2).P. Removal of Surface Trash: A commercial size trash bin for removing debris will be located on site. This bin will be for use by all parties affiliated with the operation. Upon completion of operations, the commercial trash bin will be removed from the location and disposed of in an appropriate manner.
Material Handling and Spill Prevention
02A
401130408
5/30/2017
604c.(2).N. Control of Fire Hazards: KMG and its contractors will employ best management practices during the drilling and production of its wells and facilities and will comply with appropriate COGCC rules concerning safety and fire. KMG will ensure that any material that might be deemed a fire hazard will remain no less than twenty-five (25) feet from the wellhead(s), tanks and separator(s).
Material Handling and Spill Prevention
02A
401130408
5/30/2017
604c.(2).F. Leak Detection Plan: Automation technology will be utilized at this facility. This technology includes the use of fluid level monitoring for the tanks and produced water sumps, high-level shut offs, and electronic sensors to monitor the interstitial space of double-walled produced water sumps. All automation is monitored by Kerr-McGee’s Integrated Operations Center (IOC), which is manned 24 hours per day, 7 days per week.
Noise mitigation
02A
401130408
5/30/2017
604c.(2).A. Noise: DRILLING: Sound surveys have been conducted on each rig type and are utilized to anticipate any additional effective noise mitigation once a drilling rig is determined. During drilling operations, at a minimum, and pending a safety review after construction of the location, sound mitigation barriers (straw bales) will be placed along the west side to mitigate the building unit directly to the west (~720’ away) and the building unit to the north west (~820’ away). There will also be straw bales to the north to mitigate the group of building units to the north (~1000’ away) and on the south west corner to mitigate the building unit to the south west (~920’ away). Please note, there will be a break in bales to accommodate the access road. In lieu of straw bales, sound walls may be placed along the north, west and southwest corner of the pad location to dampen noise and minimize impact when appropriate. COMPLETIONS: During completion operations, at a minimum, and pending a safety review after construction of the location, sound mitigation barriers (straw bales) will be placed along the west side to mitigate the building unit directly to the west (~720’ away) and the building unit to the north west (~820’ away). There will also be straw bales to the north to mitigate the group of building units to the north (~1000’ away) and on the south west corner to mitigate the building unit to the south west (~920’ away). Please note, there will be a break in bales to accommodate the access road. In lieu of straw bales, sound walls may be placed along the north, west and southwest corner of the pad location to dampen noise and minimize impact when appropriate. LED lights will be used during completion operations. Should technological advancements allow for better noise mitigation at the time of drilling and completion operations on this location, Kerr-McGee will re-evaluate the most effective method at that time.
Odor mitigation
02A
401130408
5/30/2017
805b. Odors: KMG will comply with the provisions of 805b as deemed applicable. Additional BMPs for the Papa Jo location are: 1) the storage of excess drilling fluid (e.g., fluid not being used in the active mud system) in closed, upright tanks; and 2) the use of an odor neutralizer in the active mud system.
Planning
02A
401130408
5/30/2017
604c.(2).E. Multi-Well Pads: In order to reduce surface impact, this application is for a 16-well pad.
Planning
02A
401130408
5/30/2017
604c.(2).Q. Guy Line Anchors: Guy line anchors will not be used. Base Beams will be used to stabilize the rig and removed after drilling.
Planning
02A
401130408
5/30/2017
604c.(2).R. Tank Specifications: A geosynthetic liner will be laid under the tanks on this location and a steel containment will be constructed. Storage tanks will be designed, constructed and maintained in accordance with National Fire Protection Association (NFPA) Code 30 (2008 version). KMG will maintain written records to verify proper design, construction and maintenance. All records will be available for inspection by the Director.
Planning
02A
401130408
5/30/2017
604c.(2).S. Access Roads: KMG will utilize a lease access road from CR 3 & CR 10 for drilling, completions, and production operations, including maintenance equipment. The road will be properly constructed and maintained to accommodate for local emergency vehicle access.
Planning
02A
401130408
5/30/2017
604c.(2).V. Development From Existing Well Pads: Drilling from an existing well pad was not feasible for the development of the wells on this proposed oil and gas location; however, this well pad will be considered for future well locations.
Storm Water/Erosion Control
02A
401130408
5/30/2017
604c.(2).W. Site-Specific Measures: KMG maintains a Storm Water Management Plan that assesses erosion control for every KMG operated location. This location will be added to this plan once construction begins. This site will be inspected every fourteen (14) days during construction activities, every twenty-eight (28) days after construction is completed, and after any major weather event.
Storm Water/Erosion Control
02A
401130408
5/30/2017
604c.(2).G. Berm Construction: Kerr-McGee will create tertiary containment by construction of a berm or diversion dike, site grading, or other comparable measures sufficient to further protect the ditch 0' E of this proposed oil and gas location.
Traffic control
02A
401130408
5/30/2017
604c.(2).D. Traffic Plan: Prior to the commencement of operations, the operator will obtain access and ROW permits per Weld County Code and implement COAs or traffic control plans as required. KMG will also implement a Traffic Management plan for town owned roads as required by the Town of Erie’s Development Code.