COGIS - Conditions of Approval Results

   CHEVRON USA INC    EMERALD 72X   WELL#: 230441   Status:TA as of 8/15/2018 2:40:25 PM   SWNW 30 2N 102W RIO BLANCO COUNTY
Search Results - 8 record(s) returned.
Type Source Conditions of Approval
Best Management Practices
Engineer
04
402263888
3/24/2020
1)	This approval is good for one year and a new application must be made before 1/9/2021 (1 year from prior application). Updates for the planned utilization of the well should be included with the application. 

2)	The Form 7 reporting must reflect the well status dates reported on the Form 4-TA request.

3)	A Form 5A is required to report all plugs currently downhole which isolate the perforated interval.

Final Review
02
401756721
7/12/2019
If this conversion to injection results in additional surface disturbance, a Form 2A is required prior to commencement of operations with heavy equipment. If this conversion to injection requires additional aboveground production facilities within the boundaries of the existin oil and gas location, a Form 2A describing the location shall be submitted within 60 days of approval of this APD.

UIC
05A
401734723
6/25/2019
Well passed MIT on 3/14/2018. Doc # 401576409.

UIC
02
401756721
6/25/2019
1. Injection is not authorized until approval of Subsequent Forms 31 and 33.
2. Retrieve water sample(s) from injection zone(s) before stimulating formation. Samples must be analyzed for Total Dissolved Solids at a minimum.
3. PRIOR TO PERFORMING OPERATIONS: Operator is required to contact COGCC to discuss acid and fracturing jobs. Approval of Form 4 may be required for acid and fracturing jobs. (As of 4/13/2016)
4. PRIOR TO PERFORMING OPERATIONS: Operator is required to contact COGCC to discuss Step Rate Test or Injectivity Test criteria for Maximum Surface Injection Pressure determination. Prior approval of Form 4 may be required for step rate and injectivity tests.
5. For all converted Underground Injection Control wells a Cement Bond Log (CBL) is required on the cased portions of the hole from the bottom of the casing to the top of the next shallower casing string for all casing strings other than the Surface Casing. Only a PDF, TIFF, or PDS visual image is required.
6. Operator must provide all tops of formations encountered from surface to TD on the Form 5 when submitted.
7. Well must pass MIT witnessed by COGCC before Subsequent Forms 31 and 33 will be approved. Well in must be in injection configuration.

Engineer
04
401880397
2/28/2019
This approval is good for one year and a new application must be made before January 10, 2020 (1 year from prior application). Updates for the planned utilization of the well should be included with the application.

Engineer
04
401734733
8/17/2018
This approval is good for one year and a new application must be made before January 22, 2019(1 year from prior application). Updates for the planned utilization of the well should be included with the application.

Engineer
04
401521406
3/22/2018
This approval is good for one year and a new application must be made before January 22, 2019(1 year from prior application). Updates for the planned utilization of the well should be included with the application. 

A Form 5A is required to report all plugs currently downhole which isolate the perforated interval. 

The Form 7 reporting must reflect the well status dates reported on the TA request.

Engineer
04
401189012
3/22/2018
This approval is good for one year and a new application must be made before January 19, 2018(1 year from prior application). Updates for the planned utilization of the well should be included with the application. 

A Form 5A is required to report all plugs currently downhole which isolate the perforated interval. 

The Form 7 reporting must reflect the well status dates reported on the TA request.

COGIS - Best Management Practices COGIS - Best Management Practices Results

Search Results - No Records Found
BMP TypeSource BMP