COGIS - COA/BMP Information

PDC ENERGY INC           Harvey 7N           Well API # 05-123-47432           Status: DG        Status Date: 03/02/2019           Location ID #:456214       SWSE 32 4N 65W WELD

COGIS - Conditions of Approval
COA Search Results - 6 record(s) returned.
Source
Document
Conditions of Approval
Form: (02 )
401597955
07/25/2018
Operator will submit signed Rule 317.s Stimulation Setback Consents via Sundry Notice, Form 4 prior to stimulation of this well. In the Form 5A comments, operator will (1) certify that this well has no treated interval within 150’ of the treated interval of another operator’s well for which a signed Stimulation Setback Consent was not obtained, (2) provide the following information for all other operator’s offset wells without consent that have a treated interval within 150’ of this as-drilled wellbore: well name and API number, depth of the perforation in this well nearest to the treated interval of the offset well, and the distance between the wells at that depth, and (3) address the wells listed below as either (a) obtained consent or (b) treated interval more than 150’ away from this as-drilled wellbore. HSR-CARTER 11-29 (API NO 123-15408) SPAYD 22-29(API NO 123-23424)
Form: (02 )
401597955
07/25/2018
Operator acknowledges the proximity of the following non-operated listed wells: Operator agrees to: provide mitigation option 1 or 2 (per the DJ Basin Horizontal Offset Policy) to mitigate the situation, ensure all applicable documentation is submitted based on the selected mitigation option chosen, and submit a Form 42 (“OFFSET MITIGATION COMPLETED”) for the remediated wells, referencing the API number of the proposed horizontal well(s) stating what appropriate mitigation occurred and that it has been completed, prior to the hydraulic stimulation of this well. LUDWIG-UPRR 31-5 1 (API NO 123-12721) PEARSON 1 (API NO 123-12005) KRAUSE 2-28 (API NO 123-13719) BOHLENDER 32-29-1 (API NO 123-09553) BOHLENDER 29-3 (API NO 123-14080) HSR-FRISBIE 16-29A (API NO 123-15309) HSR-DICKERSON 14-29A (API NO 123-15341) HSR-WRIGHT 9-29A (API NO 123-15339) HSR-SALISBURY 6-29 (API NO 123-15407) HSR-CARTER 11-29 (API NO 123-15408) HSR-FROELICH (API NO 123-15455) BOHLENDER 29-13 (API NO 123-16334) MEL SMOOKLER GAS UNIT 1 (API NO 123-08267) MUSICK GAS UNIT 1 (API NO 123-12642) HAMBERT R G 32-1 (API NO 123-13441) HAMBERT R G 32-2 (API NO 123-13442) HAMBERT R G 32-3 (API NO 123-13443) HAMBERT R G 32-5 (API NO 123-13445) HAMBERT R G 32-6 (API NO 123-13446) HAMBERT R G 32-8 (API NO 123-13448) BOHLENDER 33-5 (API NO 123-14449) BOHLENDER 33-22 (API NO 123-15190)
Form: (02 )
401597955
07/25/2018
Bradenhead tests shall be performed and reported according to the following schedule and Form 17 submitted within 10 days of each test: 1) Within 60 days of rig release and prior to stimulation or 2) If a delayed completion, 6 months after rig release and prior to stimulation. 3) Within 30 days after first production, as reported on Form 5A. If a Bradenhead test reports a surface casing pressure greater than 200 psig, stimulation is not allowed until the Engineering Supervisor has been consulted.
Form: (02 )
401597955
07/25/2018
1) Submit Form 42 electronically to COGCC 48 hours prior to MIRU (Spud Notice), for the first well/activity on the pad and provide 48 hour spud notice for all subsequent wells drilled on the pad. 2) Comply with Rule 317.j and provide cement coverage from the end of production casing to a minimum of 200' above Niobrara and from 200’ below Sussex to 200’ above Sussex. Verify coverage with cement bond log.
Form: (04 )
401762189
11/07/2018
Operator acknowledges the proximity of the following non-operated listed wells: Operator agrees to: provide mitigation option 1 or 2 (per the DJ Basin Horizontal Offset Policy) to mitigate the situation, ensure all applicable documentation is submitted based on the selected mitigation option chosen, and submit a Form 42 (“OFFSET MITIGATION COMPLETED”) for the remediated wells, referencing the API number of the proposed horizontal well(s) stating what appropriate mitigation occurred and that it has been completed, prior to the hydraulic stimulation of this well. RURAL 31-15 (API NO 123-23990)
Form: (04 )
401762189
11/07/2018
1) Oil-based drilling fluid is to be used only after all fresh water aquifers are covered. 2) Per operator request, increased surface casing depth to 1800' for aquifer protection. Increase cement volume accordingly. 3) This Form 4 makes changes to the approved Form 2 and must be displayed with the Form 2 while drilling.


COGIS - Best Management Practices
BMPSearch Results - 3 record(s) returned.
Source
Document
BMP TypeBMP
Form: (02 )
401597955
07/25/2018
Drilling/Completion Operations
Prior to drilling operations, Operator will perform an anti-collision scan of existing offset wells that have the potential of being within close proximity of the proposed well. This anti-collision scan will include definitive MWD or gyro surveys of the offset wells with included error of uncertainty per survey instrument, and compared against the proposed wellpath with its respective error of uncertainty. If current surveys do not exist for the offset wells, Operator may have gyro surveys conducted to verify bottomhole location. The proposed well will only be drilled if the anti-collision scan results indicate that there is not a risk for collision, or harm to people or the environment. For the proposed well, upon conclusion of drilling operations, an as-constructed gyro survey will be submitted to COGCC with the Form 5.
Form: (02 )
401597955
07/25/2018
Drilling/Completion Operations
Operator will comply with COGCC Policy for Bradenhead Monitoring During Hydraulic Fracturing Treatments in the Greater Wattenberg Area dated May 29, 2012. The Colorado Oil and Gas Conservation Commission (COGCC) has established this Policy Regarding Bradenhead Monitoring During Hydraulic Fracturing Treatments (“Treatment”) in the Greater Wattenberg Area (“GWA”) pursuant to COGCC 207.a. (“Policy”). This Policy applies to oil and gas operations in the GWA as defined by the COGCC Rules of Practice and Procedure.
Form: (02 )
401597955
07/25/2018
Drilling/Completion Operations
One of the first wells drilled on the pad will be logged with Cased hole Pulsed Neutron Log with Gamma Ray Log from kick-off point into the surface casing. All wells on the pad will have a cement bond log with gamma-ray run on production casing (or on intermediate casing if production liner is run) into the surface casing. The horizontal portion of every well will be logged with a measured while-drilling gamma-ray log. The Form 5, Completion Report, for each well on the pad will list all logs run in that well and have those logs attached. The Form 5 for each well shall clearly state “No open-hole logs were run” and shall reference the Rule 317.p Exception granted for the well.