COGIS - COA/BMP Information

MALLARD EXPLORATION LLC           Shoveler Fed 29-32-13HN           Well API # 05-123-47022           Status: XX        Status Date: 06/09/2018           Location ID #:455365       NENW 29 8N 60W WELD

COGIS - Conditions of Approval
COA Search Results - 3 record(s) returned.
Source
Document
Conditions of Approval
Form: (02 )
401391663
06/09/2018
Operator acknowledges the proximity of the listed offset well(s). Operator agrees to comply with the DJ Basin Horizontal Offset Policy to mitigate the situation, ensure all applicable documentation is submitted based on the selected mitigation option chosen, submit Form 42(s) (“OFFSET MITIGATION COMPLETED”) for the mitigated well(s), stating that appropriate mitigation was completed prior to the hydraulic stimulation of this well. 05-123-09375, BUTLER-FEDERAL 1-20, DA, Option 3 05-123-19440, SHOWERS 32-6-10, DA, Option 3 05-123-19441, SHOWERS 32-5-7, PR, Option 1: Run CBL to verify TOC; provide remedial cement if TOC <200' above NBRR. 05-123-19693, SHOWERS 32-14-H, DA, Option 3 05-123-20370, LU 1, DA, Option 3 05-123-20472, SHOWERS 32-11, DA, Option 3 05-123-22634, FEDERAL GOSHAWK 28-13, PR, Option 1: Provide remedial cement from 600' up into surface casing.
Form: (02 )
401391663
06/09/2018
1) Submit Form 42 electronically to COGCC 48 hours prior to MIRU (spud notice) for the first well activity with a rig on the pad and provide 48 hour spud notice via Form 42 for all subsequent wells drilled on the pad. 2) Provide cement coverage to a minimum of 200' above Niobrara. Verify coverage with cement bond log.
Form: (02 )
401391663
06/09/2018
Bradenhead tests shall be performed and reported according to the following schedule and Form 17 submitted within 10 days of each test.: 1) All: Within 60 days of rig release, prior to stimulation. 2) Delayed completion: 6 months after rig release, prior to stimulation. 3) All: Within 30 days of first production, as reported on Form 5A.


COGIS - Best Management Practices
BMPSearch Results - 3 record(s) returned.
Source
Document
BMP TypeBMP
Form: (02 )
401391663
06/09/2018
Planning
Plugged and abandoned wells will be identified pursuant to 319.a.(5)
Form: (02 )
401391663
06/09/2018
Drilling/Completion Operations
A closed–loop system will be used for drilling operations. Blowout Prevention Equipment (“BOPE”): A double ram and annular preventer will be used during drilling.
Form: (02 )
401391663
06/09/2018
Drilling/Completion Operations
317.p One of the first wells drilled on the pad will be logged with open-hole Resistivity Log and Gamma Ray Log from the kick-off point into the surface casing. All wells on the pad will have a cement bond log with gamma-ray run on production casing (or on intermediate casing if production liner is run) into the surface casing. The horizontal portion of every well will be logged with a measured-while-drilling gamma-ray log. The Form 5, Completion Report, for each well on the pad will list all logs run and have those logs attached. The Form 5 for a well without open-hole logs shall clearly state “No open-hole logs were run” and shall clearly identify (by API#, well name & number) the well in which open-hole logs were run.