COGIS - COA/BMP Information

VERDAD RESOURCES LLC           HOMESTEAD PAD 1N66W34           LOCATION ID # 450069           Status: AC        Status Date: 11/29/2018           Location : NWSE 34 1N 66W WELD

COGIS - Conditions of Approval
COA Search Results - 1 record(s) returned.
Source
Document
Conditions of Approval
Form: (02A )
401063585
04/25/2017
The Approved Form 2A permit will be posted at the location during construction, drilling, and completions operations.


COGIS - Best Management Practices
BMPSearch Results - 29 record(s) returned.
Source
Document
BMP TypeBMP
Form: (02A )
401063585
04/25/2017
Planning
604.c(2)M: Fencing: A meeting with the surface owner will determine a fencing plan. The location will be adequately fenced to restrict access by unauthorized persons.
Form: (02A )
401063585
04/25/2017
Planning
604.c.(2)J.i: Blowout Prevention Equipment (“BOPE”): A double ram and annular preventer will be used during drilling. Stabbing valves shall be installed in the event of reverse circulation and shall be prior tested with low and high pressure fluid.
Form: (02A )
401063585
04/25/2017
Planning
604.c.(2)J.ii: Backup stabbing valves will be required on well servicing operations during reverse circulation. Valves shall be pressure tested before each well servicing operation using both low-pressure air and high-pressure fluid.
Form: (02A )
401063585
04/25/2017
Planning
604.c.(2)N: Control of fire hazards: All material that is considered a fire hazard shall be a minimum of 25’ from the wellhead tanks or separators. Electrical equipment shall comply with API IRP 500 and will comply with the current national electrical code.
Form: (02A )
401063585
04/25/2017
Planning
Operator continues to work with the City of Brighton to consider additional BMP's to limit impacts on surrounding area. If additional measures are agreed to they will be added to this permit via sundry or 2A Amendment.
Form: (02A )
401063585
04/25/2017
Traffic control
604.c.(2)S: Access Roads: The access road will be constructed to accommodate local emergency vehicles. This road will be maintained for access at all times. Traffic will be routed to minimize local interruption. During construction and through the life of this location, Operator will utilize watering, via water trucks, to control fugitive dust. Additionally, the access road will be constructed with aggregate road base material and vehicle speeds will be limited to ten miles per hour to reduce dust.
Form: (02A )
401063585
04/25/2017
Traffic control
604.c.(2)D: Operator has submitted a City of Brighton Oil & Gas Development Application in which the designated traffic flow has been determined.
Form: (02A )
401063585
04/25/2017
General Housekeeping
804: Visual Impacts: All long term facility structures will be painted a color that enables the facilities to blend in with the natural background color of the landscape, as seen from a viewing distance and location typically used by the public
Form: (02A )
401063585
04/25/2017
General Housekeeping
Maintain appearance with garbage clean-up; a trash bin will be located on site to accumulate waste by the personnel drilling the wells. Site will have unused equipment, trash and junk removed immediately.
Form: (02A )
401063585
04/25/2017
General Housekeeping
604.c.(2)P. Trash Removal: All trash, debris and material not intrinsic to the operation of the oil and gas facility shall be removed and legally disposed of as applicable.
Form: (02A )
401063585
04/25/2017
Storm Water/Erosion Control
Implement and maintain BMPs to control stormwater runoff in a manner that minimizes erosion, transport of sediment offsite, and site degradation. Co-locate gas and water gathering lines whenever feasible, and mitigate any erosion problems that arise due to the construction of any pipeline(s). Location will be covered under Petro Operating Co’s field wide permit, permit number COR03 XXXX in process. Storm Water/Erosion Control Implement and maintain BMPs to control stormwater runoff in a manner that minimizes erosion, transport of sediment offsite, and site degradation. Co-locate gas and water gathering lines whenever feasible, and mitigate any erosion problems that arise due to the construction of any pipeline(s). Location will be covered under Petro Operating, LLC field wide permit. Typical stormwater BMPs installed include a silt fencing, diversion ditch, vehicle tracking pads and berm with sediment traps. Petro Operating has submitted and received approval of a detailed SWMP to the City of Brighton as part of the approved MOU.
Form: (02A )
401063585
04/25/2017
Material Handling and Spill Prevention
604.c.(2)F. Leak Detection Plan: Operator will monitor production facilities weekly at a minimum to a maximum of daily to identify fluid leaks, including, but not limited to, visually inspecting all wellheads, tanks and fittings. Additionally, annual SPCC inspections will be conducted and documented. Annual flowline testing will also occur according to COGCC rules 1101 and 1102. Inspection and record retention of flowline testing will be in accordance per COGCC regulation. All records will be made available to the COGCC upon to request.
Form: (02A )
401063585
04/25/2017
Material Handling and Spill Prevention
604.c.(2)R Tank Specifications: Tanks will be designed, constructed and maintained in accordance with NFPA Code 30 (2008 version). All tanks are visually inspected by the operator weekly at a minimum to a maximum of daily and annual SPCC inspections will be conducted and documented. Inspection and record retention of tank inspections will be in accordance per SPCC regulation. All records will be made available to the COGCC upon to request.
Form: (02A )
401063585
04/25/2017
Dust control
805.c. Operator shall employ practices for control of fugitive dust caused by their operations. Such practices shall include but are not limited to the use of speed restrictions, regular road maintenance, restriction of construction activity during high wind days, and silica dust controls when handling sand used in hydraulic fracturing operations. Additional management practices such as road surfacing, wind breaks and barriers may be used.
Form: (02A )
401063585
04/25/2017
Construction
803. Permanent lighting will be installed around the facility to allow both the operator and haulers to conduct safe operations at night. All lights will be directed down toward the location or shielded so no light pollution leaves the facility.
Form: (02A )
401063585
04/25/2017
Construction
604.c.(2).Q. All guy line anchors left buried for future use shall be identified by a marker of bright color not less than four (4) feet in height and not greater than one (1) foot east of the guy line anchor.
Form: (02A )
401063585
04/25/2017
Construction
604.c.(2).E. This will be a multi-well pad, located in a manner which allows for the greatest distances possible from building units.
Form: (02A )
401063585
04/25/2017
Noise mitigation
604.c.(2)A. Sound walls will be installed on all sides of the pad perimeter during drilling and completion operations.
Form: (02A )
401063585
04/25/2017
Emissions mitigation
Operator will bring a new or expand existing gas sales lines, in a timely manner, to send salable quality gas immediately down the sales line. Operator will tie into a gas and oil sales lines, in a timely manner, to send salable quality gas and oil immediately down the sales line. The sales lines will be in place prior to first production. The sales lines will decrease the potential emission sources on the location.
Form: (02A )
401063585
04/25/2017
Emissions mitigation
604.c.(2)C.i. Green Completions - Emission Control System. Test separators and associated flow lines and sand traps shall be installed on-site to accommodate green completions techniques pursuant to COGCC Rules.
Form: (02A )
401063585
04/25/2017
Odor mitigation
805. Oil & gas facilities and equipment shall be operated in such a manner that odors and dust do not constitute a nuisance or hazard to public welfare. Water based drilling fluids will be used during drilling operations which will limit the odor associated with development. Note: If plans change and oil based fluids are used the operator will submit a sundry ad address additional odor concerns.
Form: (02A )
401063585
04/25/2017
Drilling/Completion Operations
604.c.(2).I. BOPE testing for drilling operations. Upon initial rig-up and at least once every thirty (30) days during drilling operations thereafter, pressure testing of the casing string and each component of the blowout prevention equipment including flange connections shall be performed to seventy percent (70%) of working pressure or seventy percent (70%) of the internal yield of casing, whichever is less. Pressure testing shall be conducted and the documented results shall be retained by the operator for inspection by the Director for a period of one (1) year. Activation of the pipe rams for function testing shall be conducted on a daily basis when practicable.
Form: (02A )
401063585
04/25/2017
Drilling/Completion Operations
604.c.(2)L. Closed chamber drill stem tests shall be allowed. All other drill stem tests shall require approval by the Director. None planned for these wells.
Form: (02A )
401063585
04/25/2017
Drilling/Completion Operations
604.c.(2).K. Pit level Indicators shall be used for tanks on location.
Form: (02A )
401063585
04/25/2017
Drilling/Completion Operations
604.c.(2).O. All loadlines shall be bull plugged or capped.
Form: (02A )
401063585
04/25/2017
Drilling/Completion Operations
604.c.(2)B.i. Operator will be utilizing a closed loop system.
Form: (02A )
401063585
04/25/2017
Drilling/Completion Operations
604.c.(2)T. Within 90 days subsequent to the time of plugging and abandonment of the entire site, superfluous debris and equipment shall be removed from the site. Identification of plugged and abandoned wells will be identified pursuant to 319.a.(5)
Form: (02A )
401063585
04/25/2017
Drilling/Completion Operations
604.c.(2).U. The operator shall identify the location of the wellbore with a permanent monument as specified in Rule 319.a.(5). The operator shall also inscribe or imbed the well number and date of plugging upon the permanent monument
Form: (02A )
401063585
04/25/2017
Interim Reclamation
Operator shall be responsible for segregating the topsoil, backfilling, re-compacting, reseeding, and re-contouring the surface of any disturbed area so as not to interfere with Owner’s operations and shall reclaim such area to be returned to pre-existing conditions as best as possible with control of all noxious weeds.