COGIS - COA/BMP Information

WIEPKING-FULLERTON ENERGY LLC           Good Deal 13           Well API # 05-073-06709           Status: PR        Status Date: 05/01/2019           Location ID #:443451       SWSW 16 10S 55W LINCOLN

COGIS - Conditions of Approval
COA Search Results - 1 record(s) returned.
Source
Document
Conditions of Approval
Form: (02 )
400887642
10/02/2015
1) Provide 48 hour notice prior to spud via electronic Form 42. 2) If production casing is set provide cement coverage to at least 200’ above the shallowest completed interval or Lansing, whichever is shallower and cement Cheyenne/Dakota interval (4550’-3950’ minimum). Run and submit CBL to verify cemented intervals. 3) If well is a dry hole set plugs at the following depths: 40 sks cement +/- 50’ above the Morrow, 40 sks cement +/- 50’ above the Cherokee, 40 sks cement +/- 50’ above the Lansing, 40 sks cement +/- 50’ above any DST w/ show, 40 sks cement at 4550’ up, 40 sks cement at 3950’ up, 50 sks cement from 50’ below surface casing shoe up into surface casing, 15 sks cement in top of surface casing, cut 4 ft below GL, weld on plate, 5 sks cement each in rat hole and mouse hole.


COGIS - Best Management Practices
BMPSearch Results - 2 record(s) returned.
Source
Document
BMP TypeBMP
Form: (02 )
400887642
10/02/2015
Storm Water/Erosion Control
BMP Plan Wiepking-Fullerton Energy, L.L.C. 4600 S. Downing St. Englewood, CO 80113 303-789-1798 303-761-9067 (fax) Certification to Discharge Under CDPS General Permit COR-03000 Stormwater Discharges Associated with Construction Certification Number COR 39788 Good Deal # 13 well T10S, R55W Sec. 16: SW1/4SW1/4 Lincoln County, Colorado Description of Well Site and Construction Area 1-3 acre site with access road for drilling of oil and gas well. Terrain is flat with native grass and sagebrush. Surface water area Sand Creek, which is dry, located 450' west of well stake. Man-made pond located 150’ south of well stake. Both areas will not be disturbed by drilling operations. Dirt berm will be installed on the west and south sides of well pad to protect this area Surface Roughening will be used on low side of drill site to reduce speed of runoff, increase infiltration, reduce erosion, trap sediment and prepare soil for reseeding. Dig Mud Pit 6’ deep with 30 mil liner which will be removed after drilling operations and pit reclaimed. No Water pit. Operator will use approved E & P Waste Management Plan to have all water based mud and cutting trucked to adjacent well. Topsoil will be separated and spread on drill site as final operation before reseeding operations. To prevent soil erosion site will be disked and straw crimped in or manure spread. Reclamation will begin within 6 months weather permitting Stormwater Management Plan (SWMP) is on file in Wiepking-Fullerton Energy, L.L.C. office. Spill Prevention, Control and Countermeasure Plan are on file in Wiepking-Fullerton Energy, L.L.C. office.
Form: (02 )
400887642
10/02/2015
Drilling/Completion Operations
Open-hole Resistivity Log with Gamma Ray Log will be run from TD into the surface casing. A Cement Bond Log with Gamma-Ray will be run on production casing, or on intermediate casing if a production liner is run. The Form 5, Completion Report, will list all logs run and have those logs attached.